Reflective Adhesive Tape
50M x 50mm - Black / Yellow

Reflective Adhesive Tape
50M x 50mm - Red/ Yellow

Reflective Adhesive Tape
50M x 50mm - Red / White

Reflective Adhesive Tape
45.7M x 55mm - Yellow Segments

Reflective Adhesive Tape
45.7M x 55mm - Red Segments

Reflective Adhesive Tape
45.7M x 55mm - White Segments

7pc Impact Hex Bit Set
3/8in.Dr with Swivel Head
Sizes : 4 | 5 | 6 | 7 | 8 | 10 | 12mm
Chrome-Molybdenum

8pc Impact Hex Bit Set
1/2in.Dr with Swivel Head.
Sizes : 6 | 7 | 8 | 10 | 12 | 14 | 17 | 19mm
Chrome-Molybdenum

7pc Universal Swivel Impact Socket Set - 3/8in.Dr
Radius corner design contacts only flat surfaces of fastener
to eliminate rounding off corners and extend the life of fasteners.
Ball / swivel action makes sockets useful in tight corners.
Sizes : 10 | 11 | 12 | 13 | 14 | 17 |19mm
Chrome-Molybdenum

10pc Universal Swivel Deep Impact Socket Set - 3/8in.Dr
6 Point Radius corner design contacts only flat surfaces of fastener
to eliminate rounding off corners and extend the life of fasteners.
Ball / swivel action makes sockets useful in tight corners.
Sizes : 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
Chrome-Molybdenum

7pc Universal Swivel Impact Socket Set - 1/2in.Dr
Radius corner design contacts only flat surfaces of fastener
to eliminate rounding off corners and extend the life of fasteners.
Ball / swivel action makes sockets useful in tight corners.
Sizes : 13 | 14 | 15 | 17 | 18 | 19 | 21mm
Chrome-Molybdenum

10pc Universal Swivel Deep Impact Socket Set - 1/2in.Dr
6 Point Radius corner design contacts only flat surfaces of fastener
to eliminate rounding off corners and extend the life of fasteners.
Ball / swivel action makes sockets useful in tight corners.
Sizes : 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
Chrome-Molybdenum

16pc 3/4in.Dr Deep Impact Socket Set
Sizes : 17 | 19 | 21 | 22 | 24 | 27 | 30 | 32 | 33 | 34 | 35 | 36 | 38 | 41 | 46 | 50mm
Depth : 90mm
Chrome Molybdenum

1/4in.Dr Torque Wrench / 1 - 6Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

1/4in.Dr Torque Wrench / 5 - 25Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

1/4in.Dr Torque Wrench Repair Kit
For CT6069 and CT6070

3/8in.Dr Torque Wrench / 7 - 105Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

3/8in.Dr Torque Wrench / 20 - 120Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

3/8in.Dr Torque Wrench Repair Kit
For CT6071 and CT6072

1/2in.Dr Torque Wrench / 40 - 220Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

1/2in.Dr Torque Wrench / 60 - 330Nm
With Reversible 72 tooth Ratchet Mechanism.
Laser etched scale with fine adjustment for the respective setting value.
Ribbed Handle with Locking Ring for secure grip and easy torque setting
Applies specific torque to right-hand threaded screw connections.
Clear audible release signal.
Accuracy to plus or minus 3 percent.

1/2in.Dr Torque Wrench Repair Kit
For CT6073 and CT6074

Crimping Pliers - 6pc Set
with 5 Pairs of Pressing Jaws.
For Insulated and Non-Insulated Terminals.
Also Open Barrel Terminals and Insulated Cord End Terminals.
AWG 22-18 / 16-14 / 12-10 | DIN 0.5-1.0 / 1.5-2.5 / 4-6mmSQ
AW 20-16 / 16-14 / 12-10 / 8 | DIN 0.5-1.5 / 1.5-2.5 / 4.0-6.0 / 10mmSQ
AWG 20-18 / 16-14 / 12-10 | DIN 0.5-1.0 / 1.5-2.5 / 4-6mmSQ
AWG 22 / 20 / 18 / 16 / 14 / 12 | DIN 0.5 / 0.75 / 1.0 / 1.5 / 2.5 / 4.0mmSQ
AWG 10 / 8 / 6 | DIN 6 / 10 / 16mmSQ

8in. Glass Cut Running Pliers
Essential for all stained glass and glass fusing,
the reference line on running pliers can help you break glass quicker.
Adjustable set screw allows you to control the amount of pressure applied.

6in. Breaker Grozer Pliers
Ideal for breaking hard-to-break glass along score lines
and nibbling glass away from edges.
Compact size, easy to use and carry.
Spring loaded action reduces muscle fatigue
for easy one-handed operation.

12V / 24V Ultra-Capacitor Jump Starter
Charging Voltage : 12V / 24V DC
Starting Current : 1500A / 900A
Peak current : 2200A / 1500A
Recharge Time : < 270 seconds
Max. Consecutive Starts : 5
Min. Interval : 20 minutes
Working Temperature : minus 40 degrees C to 65 degrees C

Universal Spark Plug Gap Tool
Suitable for all 10 | 12 | 14 | 16mm threaded spark plugs.
Place the spark plug into the tool and
choose the correct feeler gauge thickness,
then turn the knob until the side electrode
is compressed to the correct gap.

Diesel Fuel Filter Socket - 32mm
32mm with 1/2in.Dr and 6 point profile.
For Ford Transit Custom MK8 2.0TDCI from 2016.
For the removal of the diesel fuel filter element.
Ford filter : 2 005 485.

AdBlue Tank Cap Remover for PSA Group vehicles
Ideal for removing the tank cap when stuck due to urea crystallisation.
Also allows correct tightening to ensure proper sealing of the system.
Applicable to Citroen / Peugeot vehicles.
For use with 3/8in.Dr Ratchet or 17mm Spanner.

BMW Intermediate Lever Spring Service Tool Kit
For the Removal and Refit of the intermediate shaft control springs
used on the VVT - Variable Valve Timing System found in
BMW and MINI - B38 3 cylinder 1.5L petrol engines
and BMW and MINI - B48 4 cylinder petrol engines.
OEM Codes : 2359088 | 2359089.

Intermediate Lever Spring Removal Tool Kit
for BMW / MINI / Citroen / Peugeot vehicles
For the Removal and Refit of the intermediate shaft control springs
used on the VVT - Variable Valve Timing System found in
Citroen / Peugeot / MINI 1.4 and 1.6L - 16 valve engines.
OEM Codes : 0197-3B1 | 0197-3B2.
119570 | 119571 | 119572 | 119573.

Fiat / PSA Timing Tool Set
for Alfa / Fiat / Ford / Lancia / Opel / Suzuki
For checking and adjusting the engine timing.
Suitable for a wide variety of models.

Clamping Washer Heat Shield Tool
For the removal of, or fitting clamping washers
which are used on under body heat shields etc.
1/4in.Dr for use with cordless tools.
Applicable to Ford and VAG Group vehicles :
Audi / Seat / Skoda and Volkswagen
OEM Codes : N90335004 | N90335006 | N90796501
Also Applicable to Ford : 6715468

Timing Tool Set
for Ford / Mazda / Volvo / VAG
For checking and adjusting the engine timing.
Camshaft Adjusting Tools.
Injection Pump Adjusting Tools.
Flywheel / Crankshaft Locking Tools.
Camshaft Sprocket Puller.
Feeler Gauge.

Front Facing Radar Sensor Positioning Tool
for the Advanced Driver-Assistance System on Volvo vehicles
Aluminium with Acrylic Spirit Level.
Allows the correct position for the front facing radar sensor
as part of the service calibration process.
Simply clips onto the radar mounting plate behind the front grill.
Applicable to : S60 / S80 / V60 / V70 / XC60 up to 2018
OEM Code : 9997407.

ADAS Park Assist Camera Leveller
Aluminium with an Acrylic Spirit Level.
Designed to ensure the correct position of the front facing PAC camera
on Volvo - XC40, XC60, XC90, S60, S90, V60 and V90 models.
Used to position the Parking Assistance Camera during calibration,
simply clips on to front facing PAC mounting plate behind the rear view mirror.
Applicable to : XC90-II | XC60-II | XC40 | S90-II | S60-III | V90-II | V60-II.
OEM Code : 999 7529.

8pc HGV Cooling System Pressure Test Kit
For testing leaks in heavy goods vehicle cooling system.
Adaptors have quick-release couplings and pump is fitted with large
easy to read dial clearly marked in both psi and bar.
Quickly identifies faulty gaskets / radiators / weeping pipes
and other causes of coolant loss
Applicable to : DAF / ERF / Iveco / MAN
Renault / Mercedes-Benz / Scania / Volvo

Oil Dipstick for Audi / VW
For Audi : A4 | A5 | A6
with 1.8 / 2.0 TFSI | 3.0 / 3.2 FSI | 2.0 / 2.7 / 3.0 TDI engines.
Applicable on Audi engines fitted with electronic oil level systems,
also can be used to assist the calibration of the driver's instrument panel.
OEM Code : T40178

Oil Dipstick for Mercedes Trucks
Designed to measure the transmission oil level.
Applicable : BENZ trucks.
Spring length : 860mm

20V Li-ion Cordless Grease Gun
Includes 20V Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC
Input Voltage : 230V AC | 50/60Hz | 105W
Max. Pressure : 10000psi / 690Bar
Max. Flow Rate : 200g/min
Max. Capacity : 470ML
Hose Length : 1M

Dual Clutch Oil Seal Remover / Installer Set for Ford
Specially designed to remove and install input shaft and
differential seals on Ford 6 speed dry plate dual clutch gearboxes.
Seal Ring Puller for inner input shaft
Seal Ring Guide for inner / outer input shaft
Seal Ring Press Tool for inner / outer input shaft
Seal Ring Press Tool for drive shaft
Gearboxes : DPS6 | 6DCT250

Self Adjusting Clutch Mandrel Kit for BMW Vehicles
Mandrel kit for centring the clutch disc on the flywheel during installation.
Can also be used to align new and previously pre-tensioned SAC clutches.
Applicable to BMW vehicles.
Sizes : 15mm x 23mm | 26.5mm | 28mm | 32.5mm | 34mm.
Centring Sleeve : 15mm | 32.5mm.

2pc Lever Set
Ideal for clutch and transmission work - also
separating ball joint connections on shifter cables & shift linkages.
Plus axle components / ball joint connection points / exhaust hangers
silent blocks / bushes and many panel types and stuck components
Large Lever / Internal dimensions : 25 x 110mm.
Small Lever / Internal dimensions : 15 x 65mm

Electric Power Steering Rack Socket
for BMW and Mercedes-Benz Vehicles
3 Pin Rack Thrust Socket with 24mm Hex drive.
For the adjustment of the lateral rack and pinion clamping nut
Applicable to : BMW 1 / 3 / 4 series and X1 / X3 / X4.
Also Mercedes-Benz C and S-class

Inner Tie Rod Installer / Remover Tool Set - 1/2in.Dr
Contains 12 SAE and Metric crowfoot adaptors
Sizes : 1-13/16 | 1-? | 1/5/16 | 1-3/8 | 1-7/16 | 1-1/2in.
29mm | 32.5mm | 33.6mm | 38.4mm | 40mm | 42mm
For inner tie rods that are inaccessible to adjust with a normal spanner.
The long socket slips over the tie rod end allowing the crowfoot adaptor
to engage with the fastener for easy removal and installation.
The inner tie rod can be removed and installed without removing the rack.

BMW Differential Front Bushing Tool Set
For the removal / installation of the front differential bushing
on BMW 5 / 6 / 7 series vehicles -
F01 | F02 | F04 | F06 | F07 | F10 | F11 | F12 | F13 | F18
With Disassembly Plates and Sleeve
Mounting Plate and Mounting Sleeve
Spindle / Spindle Nut.
OEM Code : 330020

Bushing Service Tool - Ford / Volvo - Rear
For servicing the silent bearings in the trailing arm of
the rear axle with no disassembly of the rear axle necessary.
Applicable to :
Ford : Mondeo / Mondeo Turnier / S-Max / Galaxy
Volvo : S60 / S80 / V70 / XC60 / XC70

VW T5 Front Axle Control Arm Bush Tool Set
For removal and installation of the Front and
Rear bushings on the front axle control arm.
Suitable for VW T5 / 2005 - 2011
OEM Bushing Code : 7H0 407 182 | 7H0 407 183
and aftermarket direct equivalents.

Brake Fluid Tester
For accurately checking the quality of brake fluid.
With 5 LED?s to indicate percentage of water in the brake fluid.
Requires LR03 AAA 1.5V Battery / not included.
Automatic Power Off.

Brake Bleed Catch Bottle Kit
Simple to use.
Everything needed to quickly bleed brakes with no mess.
Plastic bottle collects discharged fluid.
Three separate adapters fit the common bleeder screws.

Replacement Abrasive Stones
30mm | 1-1/8in. | 220 Grit
for CT2756 Cylinder Hone

Cylinder Hone
with 100mm / 4in. Abrasive Stones
Range : 50 - 180mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

Replacement Abrasive Stones
100mm | 4in. | 220 Grit
for CT2757 Cylinder Hone

Mercedes Brake Spring Installer
Unique tool for Mercedes vehicle parking brake.
For disassembly and assembly of spring clips on rear disk brakes
Length : 132mm

Brake Drum Gauge
Size Range 160mm - 360mm
Metric and Imperial Scale.
Developed to measure the wear limit on brake drums
as well as the diameter of the drum and then establish
the shoe position prior to drum re-fitting.
For outer and inner measurements.
With fine adjustment.

5pc Wheel Cylinder Cup / Seal Installation Rocket Set
Tapered Cones enable wheel cylinder o-rings and seals
to be installed easily without damage to the brake cylinder assembly.
Sizes :
1 - 3/4'' | 44.5 / 47.5mm
1 - 7/8'' | 48 / 51mm
2 - 1/8'' | 54 / 57mm
2 - 3/16'' | 56 / 59mm
2 - 5/16'' | 59 / 62mm

Wheel Bearing Circlip Removal / Assembly Lever Tool
Unique lever tool with specially shaped hook that allows
the easy removal and fitting of wheel bearing internal circlips.
Applicable to Vauxhall / Opel / Ford / PSA / Fiat and VAG vehicles.
Ideal for use on the Vauxhall Adam and Ford Kuga,
also suitable for Ford DCT clutch pack internal clip,
superb for clips without circlip holes.

Wheel Hub Removal Tool
Designed to allow the easy removal of seized wheel hubs.
Covers most cars and LGV vehicles with 5 / 6 / 8 hub assemblies.
Apply the spindle to a solid point on the hub.
The spindle must put pressure on at least two solid points
on the hub to completely remove the hub.
Spindle must be lubricated before use.

Flywheel Puller for Suzuki Motorcycles
M50 x 1.5mm
Suitable for the following Suzuki models :
GV | LS | LTA | LTF | VL | VS | VX | VZR

Flywheel Puller or KTM / Suzuki / Yamaha Motorcycles
M33 x 1.5mm
Suitable for the following models :
KTM : 625 SMC | 640 LC4 Adventure | 640 LC4E | 690 RFR
SUZUKI : GSXR 600 | GSXR 750 | GSXR 1000
YAMAHA : WR 450F | YFZ 450

Heavy Duty EVA Foam Work Mat
100 x 49.5cm Dual Layer
Hard Wearing
Water and Oil Resistant
Ideal for the professional and enthusiast mechanic.

Jumbo Size Bent End Pry Bar
1204mm Long with Go-Thru Handle

8pc Hydraulic Nut Splitter Kit
Hydraulic Ram provides up to 10 tonnes of direct non-twisting thrust
that is more effective and secure than a mechanical thrust screw.
Fully threaded body allows for quick and easy height adjustment.
Splitter Bodies : 3/8in. | 1/2in. | 5/8in. | 3/4in. | 1in. Diameter Capacity.
Threaded Attachment Sleeve.

18mm Stud Extractor
With 3/4in.Dr. and 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

20mm Stud Extractor
With 3/4in.Dr. and 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

22mm Stud Extractor
With 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket

24mm Stud Extractor
With 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

30mm Stud Extractor
With 46mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

11pc Stud Extractor Set
For extracting damaged and headless screws.
Sizes : 5 | 6 | 7 | 8 | 9 | 10 | 10.5 | 11 | 12 | 14 |16mm
with 3/8in.Dr / 1/2in.Dr and Go-Through Sockets
Use with 19 / 22mm Spanners or 3/8in. | 1/2in.Ratchets
Chrome-Vanadium

Connector Removal Tool for VAG / Porsche Vehicles
For safe and proper removing of most push & pull connectors
e.g. electrical connector on mass air flow sensor / MAF, pressure sensor / MAP,
ignition coil pack, headlight, fog light, level sensor, etc.
Can be used for following car types :
VW / Audi / Skoda / Seat / Porsche

7pc Hole Saw Set
Diameters : 25 | 32 | 38 | 45 | 50 | 56 | 62 mm
Working Depth : 33mm.
Saw Blade Material : 65Mn
For all drilling machines with hexagonal shaft mounting.
Suitable for drilling in Wood and Drywall Materials
e.g. plasterboard and OSB boards.
Safety lock for fixing the drill sprockets in the drill plate for high work safety.
Ideal for Cordless Tools with quick rotation stop.

Black Polishing Compound
Great for removal of scratches, pitting or rust from metallic surfaces
due to the impregnation of emery in the compound
Using this compound will save time and start the polishing process.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Blue Polishing Compound
A general use compound for all metals.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Brown Polishing Compound
General-purpose rough starting compound for initial buffing and polishing.
Can be used to cut and remove scratches and leave a smooth finish
Best used with softer metals and also used on wood.
For best results use with loose-leaf or stitched buffing wheels
to enable a powerful cutting action, apply little-and-often during use.

Green Polishing Compound
Provides a high shine finish on hard and soft metals.
Excellent results with platinum, chrome and stainless steel.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Red Polishing Compound
Ideal for polishing jewellery and precious metals such as gold and silver.
This compound can also be used with plated metals.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

White Polishing Compound
Used for removing deep scratches from soft metals or
as a polishing aluminium, gold, silver, brass and copper.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

8pc Sanding Swab Set - 150mm / 6in.
4 Grits : 120 | 180 | 400 | 800
Long shafts with double sided heads for difficult areas.
Designed for intricate sanding and polishing of wood,
plastic, and metal in dry applications.
Unique head shape and flexible shaft to reach areas
that ordinary sandpaper or files ca not reach.

11pc Polishing & Sanding Flap Disc Set
Stripping Disc
Felt Polishing Disc
Sponge Polishing Disc
Aluminium Flap Discs : 40 | 60 | 80 | 120 Grit
Zirconium Flap Discs : 40 | 60 | 80 | 120 Grit
Ideal for fabrication, de-burring, cleaning,
stripping and finishing of wood, metal and plastic.
For use with 115mm angle grinders / 22.2mm bore.

10pc Flap Wheel Set
Grit 80 |
Size : 31.5 x 10mm with 3mm | 1/8in. Shanks
Aluminium Oxide Flap Wheels
Suitable for a removing scratches / rust / corrosion and de-burring

12pc Sanding & Buffing Kit
115mm Backing Pad with Hook & Loop
with M14 Arbor for use with a power drill.
Sandpaper : 80 | 150 | 240 grit.
Sanding Pads : Red / 400 | Green / 600 | Grey / 800 grit.
Foam Pads / Orange.
Polyester Buffing Pads.
Multipurpose kit for use on wood, metal and paintwork.

12pc Buffing and Polishing Kit
115mm Backing Pad with Hook & Loop
M14 Arbor for use with a powered drill
Foam Flat and Waffle Pads
Polyester Buffing Pad
Multipurpose kit for use on wood, metal and paintwork
Max. Speed : 12500rpm

5pc Rotary Buffing Mop kit
Suitable for polishing various metals -
including Aluminium / Stainless Steel and Brass.
With 1/4in. Shank for use power and cordless tools.
Mushroom : 50mm / 75mm
Conical : 38mm
Column : 40mm
Wheel : 50mm

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm

Abrasive Disc
Diameter : 100mm
Shank : 6mm
For use with Power Drills.
Silicon carbide coated nylon mesh with steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Abrasive Disc
Diameter : 100mm
Bore : 22.2mm
For use with angle grinders.
Silicon carbide coated nylon mesh
with fibreglass backing disc and steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

24in. / 600mm Wrecking Bar
56mm Wide Mouth with Swan Neck
Fully Hardened and Tempered

Block Paving Gap Wedge Tool
900mm Long with Soft Grip Rubber Grips.
To enable repairs or adjustment.
Hammer point to knock in to tight spaces.
Foot lug for applying weight into gaps.
Hardened steel wedge.
Used to gap or space out blocks from block paving etc..

Adjustable Line Stretchers for Blocks
Clamping Capacity : 4in. to 12in.
Stretches Building Line Between Key Course Blocks
Cast aluminium construction.

4 External Building Profile Line Holders
Plastic line holder clips for external builders brick profiles
Fit any profiles that are 50mm x 50mm