Neilsen Logo

CT5518

Assorted Pack - Air Conditioning Valve Cores

134pc Air Conditioning Valve Core Set
Suitable for car air-conditioning replacement and maintenance.
4mm x 18mm R12 valve cores.
4mm x 18mm Tyre valve cores.
5mm x 18mm for VW Jeta.
5mm x 25mm for BMW.
6mm x 22mm R134A valve cores.
6mm x 22mm 6mm low side.
7mm x 20mm for Peugeot / Volvo.
8mm x 22mm long hinge side.

Air Conditioning Valve Core Kit

CT0450

Assorted Pack - Washers / O-Rings - Rubber

60pc O-Ring Rubber Washer Set
Metric Outer Diameter : 15 - 27mm
Imperial Outer Diameter : 9/16 - 1-1/16in

Rubber O-Ring Assortment Box

CT0741

Assorted Pack - Washers / O-Rings - Rubber

144pc O-Ring Rubber Washer Set
Various Sizes : 1.8mm to 3.5mm Thick | 14mm to 32mm Diameter

O-Ring Rubber Washers

CT1638

Assorted Pack - Washers / O-Rings - Rubber

225pc O-Ring Rubber Washer et
Various Sizes : 3 x 1 to 22 x 2mm

O-Rings

CT0932

Assorted Pack - Washers / O-Rings - Rubber

419pc O-Ring Rubber Washer Set
for use in Automotive / Plumbing / Hydraulics / Air and Gas Connections

O-Ring Washers

CT4096

Assorted Pack - Washers / O-Rings - Rubber

225pc O-Ring Rubber Washer Set
Made for air conditioners etc.
Sizes :
External Diameter : 3.0 - 22.0mm
Internal Diameter : 1.0 - 4.0mm

Rubber O-Ring Assortment Box

CT4074

Fan Clutch Nut Wrench - 32mm BMW

32mm Fan Clutch Nut Wrench
BMW Water Pump Removal Tool Kit
32mm Fan Clutch Wrench
Double-ended Water Pump Fan Pulley Holder
For removing water pumps on models with
temperature dependent viscosity drive fans.
Removes lock nuts on thermo-Viscous fans.

BMW Fan Clutch Wrench and Holder

CT5578

Fan Hub Wrench - 32mm

32mm Fan Hub Wrench for BMW / Ford
270mm Long
For holding the Visco-clutch drive shaft on BMW and Ford vehicles.
Especially slim design with PVC dipped handle
Enables easy access

Fan Hub Wrench - 32mm

CT5579

Fan Hub Wrench - 36mm

36mm Fan Hub Wrench for Ford / Opel
270mm Long
For holding the Visco-clutch drive shaft on Ford / GM / Opel vehicles.
Especially slim design with PVC dipped handle
Enables easy access

Fan Hub Wrench - 36mm

CT5580

Fan Hub Wrench - 41mm

41mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

Fan Hub Wrench - 41mm

CT5581

Fan Hub Wrench - 46mm

46mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

Fan Hub Wrench - 46mm

CT2075

Viscous Fan / Hub Tool Set

2pc Viscous Fan Spanner
with Fan Hub Holding Tool

Viscous Fan / Hub Tool Set

CT3907

Fan Clutch Wrench Set - 10pc

10pc Fan Clutch Wrench Set
With Fan Pulley Holding Tools
Fan Clutch / Nut / Hub Wrenches
Range from 37mm to 83mm
Range from 1-7/16 to 3-1/4in.

10pc Fan Clutch Wrench Set

CT5785

Fan Clutch Wrench Set - 7pc

Pneumatic Fan Clutch Wrench Set
for use with Air Tools
Wrench Sizes : 32 | 36 | 40 | 47 and 7/8 | 1-7/8 | 2in.
For removing and installing the fan clutch
when repairing the water pump or fan clutch.
Compatible with Ford / GM / Chrysler and Jeep vehicles.
With Carry Bag.

Pneumatic Fan Clutch Wrench Set

CT5135

A/C Compressor Clutch Retaining Tool

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

A/C Compressor Pulley Retaining Tool

CT5137

A/C Compressor Clutch Retaining Tool

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

A/C Compressor Pulley Retaining Tool

CT5136

A/C Compressor Clutch Retaining Tool

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

A/C Compressor Pulley Retaining Tool

CT5138

A/C Compressor Clutch Retaining Tool

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103

A/C Compressor Pulley Retaining Tool

CT3564

Water Pump Sprocket Retainer

Vauxhall / Opel Pump Sprocket Retainer
For 2.2 Chain Drive Petrol Engines.
Used to keep the engine in the timed position during
removal / installation of the coolant pump.
Allows the pump to be replaced without the timing chain being disturbed.
OEM Codes : J-43651 | KM-43651

Water Pump Sprocket Retainer

CT6449

Water Pump Sprocket Retainer

Water Pump Sprocket Holding Tool
for GM Ecotec engines.
Holds the timing chain and gear in place while
removing or installing water pump on
Chevrolet / Opel / Vauxhall Ecotec engines.
Simply remove access plate from front cover and install the tool.
OEM Code : EN-43651.

Water Pump Sprocket Retainer

CT2578

AC Compressor Clutch Kit

Air Conditioning Service Kit
For AC Compressor Clutches on most vehicles.
With 2 and 3 hole Puller Plate

A/C Compressor Clutch Removal Kit

CT4639

AC Receiver / Drier Core Plug Remover

A/C Receiver / Drier Core Plug Remover
For new condensers where the drier is located inside the unit
on Vauxhall / Opel / Ford / VAG vehicles.
Universal tool for plugs with 5mm inside thread
Screw the remover into thread of the sealing cover and pull straight up

AC Receiver / Drier Core Plug Remover

CT3911

AC Water Pump Pulley Wrench - VAG

Air Conditioning Water Pump Pulley Locking Wrench - VAG
Audi / VW Pump Pulley Wrench
For holding the water pump pulley on VAG vehicles

AC Water Pump Pulley Wrench

CT3540

Air Conditioning Set - 12pc

12pc Air Conditioning Set
Valve Cap Removers - SWI 2mm / SW15mm
Valve Core Tools - Standard 2.2mm / Large 3.2mm
Tamper Proof Bits - T10 to T40
Bit Adaptor - 1/4in.Dr

Air Conditioning Set

CT6053

Manifold Fastener Socket

Special Socket
8 Point | 100mm Deep | 3|8in.Dr
For loosening and tightening intake manifold fastening screws.
Applicable to : Mercedes | Nissan | Opel | Renault Vehicles
with 1.6 DCi | CDTi Engines

Manifold Suction Pipe Socket

CT6297

High Pressure Adjustable Quick Coupler - Red

High Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

R1234YF High Pressure Quick Coupler

CT6298

Low Pressure Adjustable Quick Coupler - Blue

Low Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

R1234YF Low Pressure Quick Coupler

CT6296

Air Conditioning System Test Kit

Air Conditioning System Test Kit
For testing automotive air conditioning systems using R1234YF
refrigerant only by comparing the high and low pressure readings.
60mm gauges with tough rubber protective guard with 7/16in. copper coupler
Low : -30 - 120 psi / -1 - 8 bar
High : 0-500 psi / 0 - 35 bar
Blue Hose - 1/4in. FFL x 50in.
Red Hose - 1/4in. FFL x 50in.
Yellow Hose - 1/2in. ACME x 50in.
Sight glass for viewing condition of refrigerant.

Air Conditioning System Test Kit

CT3622

Air Conditioning System Test Kit

Air Conditioning System Test Kit
Use to test / evacuate and fill A/C systems
using the R134A refrigerant.
Compares high and low pressure readings
using the vehicle A/C system specifications.
Twin 70mm gauges with impact-resistant lenses.
Sight glass for viewing condition of refrigerant.
Quick-connect fittings. High pressure safety valve.

Air Conditioning System Test Kit

CT3793

Vacuum Pump - 230V 3cfm

230V Vacuum Pump
Power: 1/4Hp
Rotating speed: 1440rpm
Inlet port : 1/4 SAE
Oil capacity : 200ml
Ultimate Vacuum : 10pa / 75ml
Use with CT3622 Manifold Gauge Set

Vacuum Pump

CT0575

Antifreeze / Coolant Tester

Antifreeze and Coolant Tester
Easy read scale and pointers.
Calibrated in degrees C and F.
Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
Tests Ethylene Glycol strength while the engine is hot or cold.
Composite body and rubber bulb for workshop durability.

Antifreeze Tester and Coolant Tester

CT1921

Antifreeze Tester / Refractometer

Hand Held Refractometer
For measuring the freezing point of
either Propylene or Ethylene Glycol based antifreeze
May also be used for checking the strength of battery electrolyte

Antifreeze Tester and Coolant Tester

CT1133

Block Tester Kit

Block Tester Kit
With Block Tester Powder
Detects exhaust gasses in radiators
and so checks for gasket damage
or cracked and warped cylinders.
Works with Petrol engines.
Not recommended for Diesel vehicles

Block Tester Kit

CT3923

Block Tester Kit - 7pc

7pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Combustion Leakage Tester

CT1137

Block Tester Powder

Block Tester Powder and Bottle
For use with Block Tester Kit CT1133 and CT3923

Block Tester Powder

CT4431

UV Light Leak Detector Set

Leak Detector Set with 3W UV LED Light
Allows detection of leaks in Air Condition Systems also
Engines and Gearboxes in conjunction with fluorescent additives.
Includes 3W LED UV flashlight.
1500mAh Rechargeable battery with charger
Protective glasses with special UV filter
Hose / Syringe and Adaptor.

UV Light Leak Detector Set

CT5260

Smoke Leak Detector

12V Smoke Leak Detector
For detecting leaks in pipe systems on cars and motorcycles
such as fuel pipes / air intakes and the radiator.
Smoke output value : 1 - 6 L/min
Output Pressure : 10 - 18psi
With Built-in air pump / Controllable flow value
Test Oil Capacity : 100ml
Supplied with all accessories needed.

Smoke Leak Detector

CT1513

Identifying Clips

Identifying Clips - 9 colour coded pairs

Identifying Clips

CT6360

Pipe Line Stopper Kit - 4pc

4pc Pipe Line Stopper Kit
Sizes : Banjo | 3/8 | 5/16 | 1/2 Inch
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.

Pipe Line Stopper Kit

CA5030015

Pipe Line Stopper Kit - 4pc

4pc Pipe Line Stopper Kit
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Sizes - Banjo | 3/8 | 5/16 | 1/2 Inch

Pipe Line Stopper Kit

CT3451

Radiator Fin Straightener

Radiator Fin Reformer
Straighten damaged fins.
Remove debris without damage.
Use on oil coolers and air conditioner condensers.
Suitable for most makes and models of vehicles.
With spacing of 8 | 9 | 10 | 12 | 14 and 15 fins per inch.

Radiator Fin Reformer

CT6349

Cooling System Pressure Test Kit - HGV

8pc HGV Cooling System Pressure Test Kit
For testing leaks in heavy goods vehicle cooling system.
Adaptors have quick-release couplings and pump is fitted with large
easy to read dial clearly marked in both psi and bar.
Quickly identifies faulty gaskets / radiators / weeping pipes
and other causes of coolant loss
Applicable to : DAF / ERF / Iveco / MAN
Renault / Mercedes-Benz / Scania / Volvo

Cooling System Pressure Test Kit

CT6404

Cooling System Pressure Test Kit

5pc Universal Cooling System Pressure Test Kit
Four universal cone adaptors fit a wide range of vehicles.
Hand pump with gauge allows simple and easy controlled testing.
Release pin allows depressurisation prior to detachment.
Contents:
Pressure pump
Cone adaptors : 17-24mm | 28-31.5mm | 37-39.5mm | 47-48.5mm
Cone adaptor system for sealing and pressurising the cooling system.

Cone Type Pressure Test Kit

CT5665

Radiator Pressure Test Kit

32pc Radiator Pressure and Cooling System Tester
For pressure testing radiators on most popular vehicles.
Will also pressure test radiator caps for leakage.
30 Colour Coded Adaptors -
allow direct connection to radiator or expansion tank.
Hand pump with gauge graduated with BAR and PSI
for easy controlled pressurization via a quick coupling system.
With Pressure release pin.

Radiator Pressure Tester Kit

CT3380

Radiator Pressure Test Kit

Radiator Pressure and Cooling System Test Kit
Universal test for leakage in radiators and coolant systems.
Colour coded caps | Vacuum purge and refill tool
Pressure testing range 0 - 35 psi / 0 - 2.5 bar
17 test caps for testing cooling systems on most vehicles

Radiator Pressure Tester Kit

CT1585

Radiator Pressure Test Kit

14pc Radiator Pressure Test Kit
Universal for Most Vehicles
Pressure Testing Pump with Gauge
Temperature Testing

Radiator Pressure Tester Kit

CT3373

Cooling System Purge Kit

Cooling System Vacuum Purge / Refill Kit
Supplied with three adaptors.
Air Pressure : 90 psi.
Air Consumption : 12cfm.
Fluid Hose Length : 900mm.
Air Inlet Size : 1/4 BSP.

Purge and Refill Kit

CT3570

Radiator Vacuum Purge and Refill Kit

Radiator Vacuum Purge and Refill Kit
Refill entire cooling system quickly
Radiator Adaptor for use with most vehicles
Coolant Hoses

Radiator Vacuum Purge and Refill Kit

CT5869

Water Pump Tester Kit

Water Pump Tester Kit
For testing cooling system water pumps in situ while the engine is running.
Indicates the coolant flow by measuring pressure rises
that occur due to the coolant flowing around the block.
Gauge : 0 - 15psi
Rubber Pipe Seals and Blanking Plugs
2 part Pipe Connector Body
2M Nylon Hose and Male Connector

Water Pump Tester Kit

CT5111

Radiator Cap - VAG

VAG Radiator Cap
No.23 for Audi / Porsche / Skoda / Seat / VW

VAG Radiator Cap

CT5112

Connector for Radiator Adapters

Radiator Adapter Connector
90 Degree

Connector for Radiator Adapters

CT5225

Funnel and Accessory Set

Spill-Free Funnel with Accessories
Controls the proper amount of coolant entering system
and enables unattended filling of the cooling system.
The clear funnel allows a visual check of the coolant from a distance.
Comes with a lid to keep contaminants out and
provide storage for the caps and adapters when not in use.
2 x 45 degree Elbows.
5in. Extension.
Caps and Adapters.
Funnel plus Lid.

Coolant Funnel and Accessory Set

CT4090

Digital Thermometer

Digital Thermometer
105mm Stainless Steel Probe
Switch between Celsius and Fahrenheit
Temperature Range : -50 C to +300 C / -58 F to +572 F
Temperature Steps : 0.1 C / 0.2 F
Power : 1.5V Battery - included
Auto power off after 15 minutes
Overall Size : 180mm x 21mm

Digital Thermometer

CT3924

Handheld Infrared Thermometer

Handheld Infrared Thermometer
Precise non-contact measurement
8:1 Optical resolution
Response Time : 500ms
F or C selectable scales
Weight : 5oz /135g
9V Battery included

Handheld Infrared Thermometer

CT5827

Coolant System Flush Gun

Air Flush Gun for Cooling Systems
Step adaptor for different hose diameters.
For use with air and water to clean most systems.
Trigger handle to control flushing and simulate pulsing force.
5 Adaptor sizes : 19 | 29 | 32 | 36.5 | 40mm
Operation pressure : 90psi

Air Flush Gun for Cooling Systems

CT2389

Engine Cooling System Cleaning Machine

Engine Cooling System Cleaning Machine
Cycle Cleaning with Equal Volume Change
Rated Voltage : DC12V
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Outlet Pipe Length : 2.5M
Relative Humidity : approx. 85 percent
Tank Capacity : 25Lx2

Engine Cooling System Cleaning Machine
NEILSEN
cannon
Job Site