Bitumen Flashing Tape for Sealing
Size : 100mm x 10M
Suitable for general repairs and sealing use.
Weatherproof / Easy to use / Tough but flexible.
Lasts up to 15 years
Construction Temperature : +5D - +40D
Working Temperature : -40D - +80D

Bitumen Flashing Tape for Sealing
Size : 150mm x 10M
Suitable for general repairs and sealing use.
Weatherproof / Easy to use / Tough but flexible.
Lasts up to 15 years
Construction Temperature : +5D - +40D
Working Temperature : -40D - +80D

Dual function mortar or tile grouting gun - easy to use and load.
Ideal for grouting tiles or filing gaps between bricks / slabs
and re-pointing walls.
Gun - 380mm Aluminium body with metal ratchet handle.
With Straight Nozzle | Angled Nozzle | Grouting Nozzle
Spare Plunger and Filling Scoop

20V Li-ion Cordless Paddle Mixer
with Brushless Motor
Includes 20V Battery and 4.0Ah Fast Charger.
Rated Voltage : 20V DC | 105W
No Load Speed : 0-450 / 0-720/min
Thread : M14
Diameter of Paddle : 120mm
Mixing Paddle Length : 600mm
Charger Input Voltage: 230V AC | 50 / 60Hz
Charging Time : 1H

Electric Mortar Mixer
Voltage : 110V / 1200W / 60Hz
Speed : 0 - 500rpm / 0 - 700rpm
Mortar Mixer Paddle : 120mm / 590mm Long
Supplied with spanners and spare carbon brush.
Soft start with Variable speed.
Will mix up to 80 litres in volume.
For mixing high density mortar and aggregate building materials thoroughly.
Replacement paddle available - CT1434

Electric Mortar Mixer
Voltage : 230V / 1200W / 50Hz
Speed : 0 - 500rpm / 0 - 700rpm
Mortar Mixer Paddle : 120mm / 590mm Long
Supplied with spanners and spare carbon brush.
Soft start with Variable speed.
Will mix up to 80 litres in volume.
For mixing high density mortar and aggregate building materials thoroughly.
Replacement paddle available - CT1434

Mortar Mixer Bar
2 part Mixing Paddle for Electric Mortar Mixers CT0949 and CT0950

'D' Type Brick Holding Tongs
Adjustable 400 to 725mm
Automatic Jaws
Designed to carry 6 - 10 bricks

Brick Holder - Y-Type
When the Clamp is lifted the Jaws Automatically Close Clamping the Bricks Solidly in Place
Max Length 1300mm

Brick Cutter
This is a Manual Paving Block / Brick Cutter or Splitter
Cutting Length up to 400mm
Cutting Depth : 10 - 100mm

Dutch Pin / Masonry Clamp
250mm Corrosion resistant steel shaft.
Ideal for hammering into plaster and most masonry work.
No more nailing boards.
Makes easy levelling of work before final tap with hammer to tighten.
Ideal for profiles that need fixing temporarily to the wall.
Excellent hold ability and quick release by just tapping the outer end.

Dutch Pin / Masonry Clamp
300mm Corrosion resistant steel shaft.
Ideal for hammering into plaster and most masonry work.
No more nailing boards.
Makes easy levelling of work before final tap with hammer to tighten.
Ideal for profiles that need fixing temporarily to the wall.
Excellent hold ability and quick release by just tapping the outer end.

Mortar Spike
For holding the internal profile steady by pushing into perp joint
and tightening screw on the profile.
Solid Steel / Zinc Plated

175mm T-Type Bricklaying Profile Clamp
Zinc plated to prevent corrosion.

265mm T-Type Bricklaying Profile Clamp
Zinc plated to prevent corrosion.

2in. / 50mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

5.5in. / 140mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

7in. / 178mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

8in. / 200mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

12in. / 300mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

12in. / 300mm Bricklaying Profile Clamp
T-Bolt Screw / 80mm Thread
Internal
Solid Steel / Zinc Plated

13in. / 330mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

22in. / 560mm Bricklaying Profile Clamp
Sliding with
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

13.75in. / 350mm Bricklaying Profile Clamp
Nail-On
T-Bolt Screw / 80mm Thread
Solid Steel / Zinc Plated

9in. / 230mm External Profile Clamp
for External Building Profile

14in. / 355mm External Profile Clamp
for External Building Profile

18in. / 460mm External Profile Clamp
for External Building Profile

Bricklaying Dori Block with Lock Bolt - Long Sided
Making the first brick sit exactly flush with the string line.

Small Door Gauge
Used for small to medium steel door frames 38mm - 47mm.
Zinc plated to prevent corrosion.

Large Door Gauge
Used for small to medium steel door frames 38mm - 72mm.
Zinc plated to prevent corrosion.

WA Door Gauge
Door gauge specifically engineered to suit WA sized requirements
Zinc plated to prevent corrosion.

TCT Masonry Saw
Heavy Duty with 25 Teeth and 13 Tungsten Carbide Tips.
Rust Resistant Coated Blade with Rubber / ABS Handle.
Use to cut Brick / Aerated Concrete Blocks / Slate and Cement Products.

300mm Petrol Disc Cutter
58cc 2 stroke air cooled single cylinder Engine
Rated output power : 2.4Kw
Idling Speed : 3000rpm
Fuel tank capacity : 550ml
Max cutting depth : 105mm
Blade diameter : 300mm
Bore diameter : 25.4mm
Blade speed : 4800rpm

350mm Masonry / Tile Saw Bench
Motor : 230V / 50Hz
Input : 2.2KW
Speed : 2800rpm
Dimensions L x W x H: 1200 x 600 x 1260mm
Table Size : 530 x 430mm
Cutting Disc : 350mm x 25.4mm
Cutting Height : 110mm - 90 degrees / 72mm - 45 degrees
Cutting Length : 700mm

NOTE ! - This saw table will NOT run from an ordinary UK 13amp plug.

4300TS Brick Cutter
This is a Manual Paving Block / Brick Cutter or Splitter
Cutting Length up to 430mm
Cutting Thickness 10-120mm

Brick Jointing Trowel
for 13mm and 16mm Mortar Joints

Brick Jointer with 4 interchangeable Steel Barrels
Sizes : 1/2 | 5/8 | 3/4 and 7/8in.
Cast aluminium handle with increased knuckle room
Supplied with storage pouch for spare barrels

Brick Jointer Barrels for CT3741
Sizes : 3/4in. & 7/8in.

10mm Sled Brick Jointer
Length : 490mm
Diameter : 3/8in. / 10mm
Zinc plated to prevent corrosion

12mm Sled Brick Jointer
Length : 490mm
Diameter : 1/2in. / 12mm
Zinc plated to prevent corrosion

16mm Sled Brick Jointer
Length : 490mm
Diameter : 5/8in. / 16mm
Zinc plated to prevent corrosion

19mm Sled Brick Jointer
Length : 490mm
Diameter : 3/4in. / 19mm
Zinc plated to prevent corrosion

Leaf and Square Profiling Trowel
Arrow Head and Rectangular Blades
For fine finish work

10mm Finger Trowel

4in. / 100mm Pointing Trowel
with Cushion Rubber Grip

4in. / 100mm Pointing Trowel
with wooden handle

6in. / 150mm Pointing Trowel
with Cushion Rubber Grip

6in. / 150mm Pointing Trowel
Precision Polished Blade
Industrial Welds
Traditional Wooden Handle
Available in boxes of 12

10in. / 250mm Pointing Trowel
Precision Polished Blade
Industrial Welds
Traditional Wooden Handle
Available in boxes of 12

11in. / 280mm Brick Trowel
with Cushion Rubber Grip

6in. / 150mm Bucket Trowel
Heat Treated Steel Blade with Cushion Rubber Grip Handle

7in. / 180mm Bucket Trowel
with Cushion Rubber Grip

7in. / 180mm Gauging Trowel
with Cushion Rubber Grip

7in. / 180mm Gauging Trowel
Precision Polished Blade
Industrial Welds
Traditional Wooden Handle
Available in boxes of 12

Plumb Bob and Line
5oz steel bob with approx 4.5M of line
Ideal for checking vertical structures
Ideal for plumbers | joiners | builders | plasterers | decorators etc

30M Chalk Line Reel Set
with 80mm Plastic Line Spirit Level
113g of Blue Micro Fine Powdered Chalk

2pc Line Level Set
Impact Resistant Vial
Orange High Visibility Housing
Accurate Bubble Vial
Hooks for use with Masonry Line

2pc Line Pin Set
2 Metre Line with 2 Pins

2pc Masonry Line Pin Set
with approx. 18M of Line
Suitable for all building work

Adjustable Line Stretchers for Blocks
Clamping Capacity : 4in. to 12in.
Stretches Building Line Between Key Course Blocks
Cast aluminium construction.

4 External Building Profile Line Holders
Plastic line holder clips for external builders brick profiles
Fit any profiles that are 50mm x 50mm

Line Blocks with 18M Line
L - Shaped plastic block
Easy Line adjustment and storage
18 metres polyethylene brick line

30M Brick Line - Yellow
with Hand Reel

82M / 269FT Brick Line - Orange
Strong high visibility line with hand reel

100M / 328FT Brick Line - Yellow
Strong high visibility line with hand reel

150M / 492FT Brick Line - Orange
Strong high visibility line with hand reel

70M Yellow Brick Line
Cardboard Core
Not affected by mortar / oil or mildew and will not absorb water
Ideal for masonry work and landscaping.

70M Pink Brick Line
Cardboard Core
Not affected by mortar / oil or mildew and will not absorb water
Ideal for masonry work and landscaping.

70M Green Brick Line
Cardboard Core
Not affected by mortar / oil or mildew and will not absorb water
Ideal for masonry work and landscaping.

70M Blue Brick Line
Cardboard Core
Not affected by mortar / oil or mildew and will not absorb water
Ideal for masonry work and landscaping.